yo @ all-->help barry allen-->and more!

[cold007]

i have ..a dm 7025 2x s-->

i been heavily medicated (due 2 health prob) for the last 3yrs--->
so my brain..is "freeze-dried"-->

the last couple of weeks..im stopping this morphine..> and feeling real good.(bitchy but good..)... I CAN THINK AGAIN!!!-->lol

so i need some help..on getting my box running the best it can!->


i have now ..gemini 3.0 & barry allen--> but cant seem -.- to get any other image working??

i ftp- a nfi image to MB_images..> but when i tell barry allen to --> install this image..it-.-say´s--barry allen is working..bla bla bla--> then supposed to come back in 3 mins..but when it restarts..> no new image??-->

anybody have a tip.-.what im doing wrong??

thanks for the help...in advance!

cold007--> aka

tommy:barbecue

[SuperCOCO]

Cold,

could be many things... but, first of all, could you tell us if you are using a Compact Flash card or a USB stick to store the multiple images. Another question, which image you have as main in the system flash?

My suggestion is the following:
1. Without any CF or USB, flash an original image from Dream Multimedia on flash.
2. Check that this image works fine, of course that it will work with FTA channels.
3. a) If using USB stick, install the drivers for USB memories.
3. b) If using CF, plug in the CF only when machine is switched off.
4. Restart machine.
5. Install the multiboot software on flash. Configure it specifing the device to store images, USB, CF or HDD (this one not desirable).
6. Reboot again from multiboot console, that is, boot from flash.
7. Check with FTP software, if under /media folder appears folders like mb1, mb2, mb3... etc
8. try to install a new image from /media/MB_images onto one of the new partitions through the multiboot console.
9. try to boot from this image

If even in this way doesn't work, probably your multiboot device (CF or USB) is not compatible.

In my case, I have multiboot on CF and is working fine. Only once few months ago, one of the partitions was corrupted and I couldn't install images on that partition. When I recreated the partition I was able to use the partition again.

Regards,
:SC:

[cold007]

Cold,

could be many things... but, first of all, could you tell us if you are using a Compact Flash card or a USB stick to store the multiple images. Another question, which image you have as main in the system flash?

My suggestion is the following:
1. Without any CF or USB, flash an original image from Dream Multimedia on flash.
2. Check that this image works fine, of course that it will work with FTA channels.
3. a) If using USB stick, install the drivers for USB memories.
3. b) If using CF, plug in the CF only when machine is switched off.
4. Restart machine.
5. Install the multiboot software on flash. Configure it specifing the device to store images, USB, CF or HDD (this one not desirable).
6. Reboot again from multiboot console, that is, boot from flash.
7. Check with FTP software, if under /media folder appears folders like mb1, mb2, mb3... etc
8. try to install a new image from /media/MB_images onto one of the new partitions through the multiboot console.
9. try to boot from this image

If even in this way doesn't work, probably your multiboot device (CF or USB) is not compatible.

In my case, I have multiboot on CF and is working fine. Only once few months ago, one of the partitions was corrupted and I couldn't install images on that partition. When I recreated the partition I was able to use the partition again.

Regards,
:SC:

yo..i followed u..>:smoke:

1--new nfi original image--<>
2--formated my cf card & hdd..<>
3--installed barry 4.1--<>
4--installed new gemini 3.10 on cf-<>
5--> booted--> cccam2.04->my config-->bouqets..>saved image..>

and..living like a big dog in bone heaven!-->:beer:

now..> have a fresh system all runing fine..>

what do i need..to really..fine tune this baby??!->
hints..tipps walkthroughs..>wanted!



asta
cold007> aka-->tommy:barbecue