data100
05-08-2007, 13:32
:D Little HowTo DM7020 with HDD, CF card and USB
Best way to use both or all three in DM 7020 is:
1.) Install hdd as master on first ide controller
2.) Put the CF into (the slot is second ide controller), also as master
3.) Put the original DM 7020 - Image into the flash!
4.) Start the DM image from flash
5.) If not done, format hdd
6.) Start FlashWizardPro on your PC
7.) Format CF-Card from FalshWizardPro and install CF-card for MultiBoot
8.) Load one (or more) image(s) you like with FlashWizardPro to your CF card
9.) For USB the is no ide controlle needed but same procedure, put USB in USB slot
10.) Start FalshWizardPro, running an Image from Flash
11.) Format/Install USB for MutliBoot
12.) Copy Image(s) with FlashWizardPro to USB-Stick
That's it, from now, you can manage CF and USB with FlashWizardPro, don't need to boot the DM-Image (its'alone needed to format CF if you get problems!)
Best way to use both or all three in DM 7020 is:
1.) Install hdd as master on first ide controller
2.) Put the CF into (the slot is second ide controller), also as master
3.) Put the original DM 7020 - Image into the flash!
4.) Start the DM image from flash
5.) If not done, format hdd
6.) Start FlashWizardPro on your PC
7.) Format CF-Card from FalshWizardPro and install CF-card for MultiBoot
8.) Load one (or more) image(s) you like with FlashWizardPro to your CF card
9.) For USB the is no ide controlle needed but same procedure, put USB in USB slot
10.) Start FalshWizardPro, running an Image from Flash
11.) Format/Install USB for MutliBoot
12.) Copy Image(s) with FlashWizardPro to USB-Stick
That's it, from now, you can manage CF and USB with FlashWizardPro, don't need to boot the DM-Image (its'alone needed to format CF if you get problems!)