Using 8 way diseqc (1.1) switch

[Net Babu]

Using 8 way diseqc (1.1) switch, try following settings:

a. From setup menu select service searching > Satellite configuration > non standard user defined configuration
b. select satellite, press OK on LNB column
c. press blue button or select next page
d. enter these diseqc settings
- Toneburst : no
- DiSEqC mode : Version 1.1
- DiSEqC Parameter : none
- DiSEqC Repeats : no
- Uncommitted switch : Input 1
- Sequence repeat : no
- Swap Commands : no
- Fast DiSEqC : no

Repeat above steps (b-d) for all required satellites and change LNB 0 to 1, 2, 3, .. with matching Input 1, 2, 3, .. in Uncommiteted switch option.

Regards,