Getting N line to work

[Jimbo55]

Hi all. I can get C line to work. No problems changing files or up loading to AZbox (Using DCC). Cccam 2.1.1 installed. No HD channels working though and slow to encrypt but managing. Now when I hash the C line and put in place a N line the box will not decrypt. N line for eg is:- N: 192.168.1.202 10000 azbox azbox 01 02 03 etc to 14. Which is from my Black Box server. (dream 500s replica).

Any help appreciated:xtree:

[LilleMama]

To test CCcam is active on AZbox insert in browser and it will the connections

[Jimbo55]

Thanks for reply. tested cccam and get results as expected:- Welcome to CCcam 2.1.1 server


Current time 15:21:57
NodeID: 5665384d64f61240
Uptime: 00d 00:09:13
Connected clients: 0
Active clients: 0
Total handled client ecm's: 0
Total handled client emm's: 0
Peak load (max queued requests per workerthread):

[Jimbo55]

Server connection settings:- Welcome to CCcam 2.1.1 server

Server connections: 1
+----------------------------+------------+---------+--------+----------------+-------+-------------------------------+
| Host | Connected | Type | Version| NodeID | Cards | CAID/Idents |
+----------------------------+------------+---------+--------+----------------+-------+-------------------------------+
xxxxxxxxx.xxxxxx.net:12000|00d 00:00:18|CCcam-s2s|2.1.2 |abaf607a4f173a7b| 178 |local 0961:000000 70(0) |
| | | | | | |local 0963:000000 73(19) |
+----------------------------+------------+---------+--------+----------------+-------+-------------------------------+

[Jimbo55]

After pulling all my hair out on this one it was a simple reboot of the black box. Welcome to CCcam 2.1.1 server

Server connections: 2
+----------------------------+------------+---------+--------+----------------+-------+-------------------------------+
| Host | Connected | Type | Version| NodeID | Cards | CAID/Idents |
+----------------------------+------------+---------+--------+----------------+-------+-------------------------------+
xxxxxxxxx.xxxxxxxxx.net:12000|00d 00:04:04|CCcam-s2s|2.1.2 |abaf607a4f173a7b| 172 | |
|192.168.1.202:10000 |00d 00:00:18|newcamd | | | 1 |

[gorski]

New MultiCAS in EMU section!!! The setup to use now is:

1) NewCS 1.20RC13 as a card reader [for the built-in card reader!] and Newcamd server

2) MultiCAS as a client
-turn off ["deactivate"] MultiCAS as a card reader[it won't try to gain access to the card reader]-setup Newcamd Client to read your own card from your NewCS server [while being a server]
-CCcam Client can be active at the same time, getting other people's CCcam Servers

Still needs improvement but fun to try...:xtree: