MeoBoot (Latest):

[LilleMama]

No BOMB

work all enigma 2 image

Working on the Clone Boxes


MeoBoot (new Multiboot plugin / tool) I see no nejavlja this fantastic plugin for me, one of the largest so far
after FW MusicBoba.
It is true this is the first test version but that did not encounter even a single image
I tested a Neradi that we can say that he continued the tradition
FW from my old friend MusicBoba.
Plugin is installed on all the images in a flash that I tested (including original images CVS DMM)
Plugin is less than half a mega.
This half-mega is important because the plugin is not controlled by nothing and only serves its purpose installations
images on the CF / SD / USB with it is so easy to install images to recommend it to everyone.

Installation

1) Download the file to your PC and unzip
2) via FTP, copy the file in / tmp
3) start telnet
4) Write the command cd /
5) Write the command ipkg install / tmp/MeoBoot06a.ipk
6) Plugin will be installed and Enigma2 restartovana
7) Now the plugin is in the plugins demise image
and as well as with Nabilo PureFlash can install the other images
MultiBoot.Proceduru installation images to read the specific post / thread
PureFlash on Nabilo image.

They are images that have the ability to install the ipk files in it
This option can also be used for telneta
if not then the above mentioned procedure.



We can not use both BA and MeoBoot images and install the BA can not be used with MeoBoot
and vice versa. So all you have to re-install
So you must decide which image plugin / loader ces use
BA or MeoBoot.

For Nabilosat E2 images

[LilleMama]

Thx Amaano.
That TGZ file is for Nabilo images, the IPK file is for all images. They will both automatically restart Enigma2.


About MeoBoot

What is MeoBoot:
MeoBoot is a new, very light, not invasive, Multiboot tool for Enigma 2 images.
MeoBoot is the answer to those who wish to have an alternative to the existing multiboot tools, which have now become a kind of image in the image, controlling your DM, doing tasks that go beyond their purposes, reaching large file sizes.

System requirements:
MeoBoot is currently designed to work only with Enigma 2 images for Drembox series DM8xx, namely for dm800 and DM8000.
MeoBoot can be installed on a standard CF (Compact Flash), an SD card, or a normal USB key.
MeoBoot only accepts devices formatted in Linux (part1) and this to ensure the best performance in dreambox native environment.
The HDD install option is not available. The HDD standby feature makes the HDD install a bad solution, and therefore the USB, CF and SD are preferred instead.

Operation:
MeoBoot is very simple and intuitive. The plugin includes an Help button, explaining where to upload images before install and how to remove it. It also includes a feature to format the device where the MultiBoot will be used.


About multiboot tools, and suggestions on how to keep the image always updated.

An insight of all multiboot tools would require understanding that DMM second stage are not possible to modify.

This means that the current multiboot tools may intervene in the process of starting the Dreambox only after the kernel and Secondstage have been loaded.
It is therefore importanto to understand that when using a multi-boot tool, the drivers, secondstage and kernel will be loaded by the flash image.
This procedure requires some precautions:
1) It is a good idea to always update the flash image, to make sure it includes the latest drivers and secondstage. Drivers and Secondstage can be easily updated via the Software Manager, available in the flash image. If the drivers and secondstage of your flash image are old, they will also be used for the new images you will install to multiboot.
2) Do not install to multiboot images too old, compared to the flash image. They may not work properly when the drivers are very recent, and the CVS is very old.
3) Do not use images in multiboot with different kernel versions. This may cause the malfunction of your whole dream.
For example, do not use the latest OzOon images with Nabilo, LS, Gimini or NewEnigma. Ozoon latest images include a different kernel and are incompatible.
To avoid trouble then before installing a new image, always check the image kernel version, and make sure it is the same as the flash image.
These are few and simple explanations that are relevant to all multi-boot tools and if you follow them, you will then make sure that your Dream always performs at itsbest, keeping it as much as possible efficient and updated.

MeoBoot was written precisely for this to be simple, transparent and lightweight.
It is very small compared to other MB and does not reach even a mega.
It only does its job, and does not invade your dream, do not check if it is a clone or not, check your network, it does nothing extra. Only does multiboot!

Enjoy MeoBoot

To install it to your DM:
1) download the file to your PC
2) via FTP, copy the file to your DM in /tmp
3) start a telnet session
4) type cd /
5) type ipkg install /tmp/MeoBoot06a.ipk
6) the plugin will be installed and Enigma 2 will automatically restart
7) the plugin is available in your image plugin list

However, if your image offers a panel to install IPK's, then you can use it.

[LilleMama]

MeoBoot 0.92
MeoBoot092pack.zip 407.49 KB

What is new ?MeoBoot now supports DM7025
Boot Menu and Boot Logo
Backup/Restore multiboot images
DM8000 SD card installation bug fixed
International Languages SupportCurrently Available languages:Italian by bacicciosat
Croatian by Min@
Serbian by Veselinv
Espanol by Seti72
Portuguese by Porto
French by SuperAnyaTo install the plugin, you must first boot from your flash image, then follow these steps:

1) with your favorite FTP tool, copy the IPK file to /tmp
2) start a Telnet session
3) digit cd / and press Enter
4) digit ipkg -force-overwrite install /tmp/MeoBoot092.ipk and press Enter

Enigma2 will automatically restarted. Launch the plugin, and the update will have been completed.
After the upgrade is completed, all your previously installed images will still be available.































'

[Lujdzo]

Plugin E2 - Meoboot 0.93

For Dreambox models:
Dm7025, Dm800, Dm8000


This package is for final users only.
Here you can download the current version of MeoBoot plugin ready to be uploaded to your dreambox.
The package is for final users that wants only to install MeoBoot in their current image.




Instructions:
Uncompress the package
Boot your dreambox from Flash
Upload the files in your dream following the included directories
Restart Enigma2"



()

[LilleMama]

Download MeoBoot Plugins


This package is for final users only.
Here you can download the current version of MeoBoot plugin ready to be uploaded to your dreambox.
The package is for final users that wants only to install MeoBoot in their current image.


Instructions:



Uncompress the package
Boot your dreambox from Flash
Upload the files in your dream following the included directories
Restart Enigma2"



Download current package:

enigma2-plugin-MeoBoot_0.94.tar.gz ()

[antox]

Download MeoBoot Plugins

enigma2-plugin-MeoBoot_0.94r2.tar.gz
This package is for final users only.
Here you can download the current version of MeoBoot plugin ready to be uploaded to your dreambox.
The package is for final users that wants only to install MeoBoot in their current image.

Instructions:

* Uncompress the package
* Boot your dreambox from Flash
* Upload the files in your dream following the included directories
* Restart Enigma2"