- AZbox HD Tutorials section...
In Spanish but many pictures tell it like it is... ;) :)
MultiCAS
*Version 1.61C-A09 *Release date: 14/12/2009
- Add : Add Support new_biss.key file.
-> When Start MultiCAS, MultiCAS will be try to reading this file..
-> Everything can be control by user...1) Here is how to install MultiCAS from a file you get on a forum like this one:
Start your FileZilla Client [for instance, freeware!] -> get into AZbox HD -> Plugins -> OpenXCAS -> MultiCAS -> delete all "example" files, openxcas.conf and multicas emu_module.
Put in:
-openxcas.conf
-new_bis.key
-emu_module files
from a file one gets from a forum like this one.
Give emu_module CHMOD to 755 by right clicking on it -> File Permissions -> Change file attributes -> numeric value to 755 -> OK.
Reboot.
The right version should be showing in AZbox HD MultiCAS menu. All CCcam and Newcamd servers should be preserved, if you put them in before!
Server details are in MultiCAS in /tmp file: ccc_serverstatus.info
=======================================
2) It is possible to install and configure it all out via remote, if the file is available to download from azboxworld, straight into your AZbox HD:
First, stop all other emus and activate ONLY MultiCAS [the # thing, using the blue button on your remote, as you may have read in my "Alternative Guide", where you will get a lot more info on many more subjects...]
If one already had MultiCAS installed, normally one just downloads and installs the new MultiCAS "executable" from the net straight into the AZbox HD. No need for a "config" file and no need to uninstall the previous version already installed in your box.
A) Home -> Plug-ins -> OpenXCAS -> DOWNLOAD EXECUTABLE -> you will see the support server link to get your plug-ins there: ()
B) Download and install the latest MultiCAS by pressing on the OK button of your remote!
C) Get the configuration files for EMUs/CS SW from DOWNLOAD CONFIG, in the same part of the "Plug-ins menu", if there are such specific files for the latest version.
If not - no need to do this step. It seems that if you had the previous version of MultiCAS already installed [and it was all functioning], and the writers had not provided us with a specific NEW config file - the old config file will function with the new version of MultiCAS just the same.
At this point it is good to reboot your AZbox HD!
D) So, when it reboots, using your remote control ,go to Home -> Plug-ins -> [as described above...] -> MultiCAS -> Smart Card Splitter and CS.
E) Change the following, using your REMOTE:
-change the Mode to Client CCcam - you can connect to other people's servers
-choose Server No. 1 [when done with the first one, move this one to 2, then 3 etc. - as many as you need, up to 16, I think...]
-choose Host Name Use - write something like: something.dyndns.org [whatever the data you get from your server/"peer", for instance [I]somenickname.dyndns.org or whatever your server is called like - I DO NOT HAVE A SERVER, THIS IS ONLY AN EXAMPLE!!!],
-choose the Port - 12000 or whatever it is that your peer tells you to use
-User Name - whatever it is [you must have a username that normally your peer gives you and put in his server to allow you access to his server]
-Password - whatever it is [like above]
-Server - Enable
-Connect - test it
It should say "login success"...
Repeat for all the servers you have, to check...
Red Button = Save.
F) But still: as soon as I wanted to get out of there, using the Exit button on my remote, it first asked me, in a little pop-up window, if I want to login to all my servers now. Press OK, of course. It will connect to your peers aaaaaand.... colours!!!
If not, change the channel and then it should connect! If not - reboot and check again...
The new version shows you the information, as to which server it is trying to hook onto and if it's a success... (dad)
G) If you have peers with a Newcamd server, you can ALSO connect to a Newcamd server directly, now!!! Configure it the same way as CCcam Client, using your remote, for instance.
Or you can connect to your own NewCS server, if you are using NewCS 1.20 RC13, which can use the AZbox HD's built-in card reader.
So, if you do not want MultiCAS to read your smartcard inserted in the built-in AZbox HD card reader, you can disable the MultiCAS access to it, using the following file in MultiCAS folder of your AZbox HD.
cardreader.cfg
###### Disable or Enable option for cardreader of MultiCAS
###### Disable_CardReader = 1 -> Disable-Internel CardReader / Disable_CardReader = 0 -> Enable-Internel CardReader
Disable_CardReader = 0 In that case, you can activate [the blue button command, removing # in front of it] and configure NewCS' [v. 1.20 RC13] Newcamd protocol, to read your card. I will presume you have installed it, activated and configured it properly [and that NewCS supports your card, of course]. More info about it a bit later...
You can even connect your NewCS card reader and MultiCAS by using MultiCAS Newcamd protocol.
Hfmls tested it with Nagra3 Cabo card [I bothered him:idea:] and he says it works. Buggy. But it works.(dad)
We await further improvements.:kingstone:
============================================
3) Another way of editing it all is using telesat's MultiCAS Edit. Version 1.4, I think, is the latest...
============================================
[B]The relevant config files to discuss:
The new_biss.key - how it functions... Btw, I checked Fox TV Serbia on 12.5W and it works:
What can we can open with MultiCAS Emulator [and not Card Sharing functions]? The info is here:
- more or less the same as MGcamd Emu.
BISS works, from what I can tell, with the keys included in the file.
You can change them via remote. See my "Alternative guide..." post no. 5:
Putting a working key into MultiCAS, via remote...
When you don't feel like searching for or can't change the full version what can you do? Find a key on the net, for educational purposes only, of course... <wink, wink>
Where? The forums I already mentioned have the keys sections, where I get the active working key and then...
HOME button on your remote controller -> Plug-ins -> OpenXCAS -> Activation & Priority Settings -> put the # in front of all Plug-ins, except MultiCAS, by using the blue button.
Get out of the Menu, using the Exit button on your remote -> Camd Setup -> OK -> MultiCAS -> Edit And Convert Keys -> sub-menu Nagravision -> right arrow on your remote -> "down" arrow on your remote -> find the Digi TV section -> Ident [2011 - warning: for Dream, Humax etc. receivers the Ident is 2111 but don't let that worry you!] -> put the key in now...
If, for instance, key 00 was active, one must edit it in 2 parts, as the Nagra keys are "broken" in two parts: for key 00, the first part is Index 00,the other is 10; for key 01 it’s 01 & 11.
So, choose a relevant part of the key [in this case it's 00 20 11 00] by pressing the remote OK button and then one gets a new window to edit the old key. Put the first part in, then hit the Save button on your TV screen, then the other part [in this case it's 00 20 11 01], then Save.
Get out of that sub-Menu, using the Exit button, then go to Activation & Priority Settings, restart MultiCAM, using the yellow and/or OK buttons -> OK -> then get out using the Home button -> TV -> OK and.... [if the key is correct and you put it in precisely] – colours [heheeee]!!!
Thanx to Ribolovac from Ex-Yu sat forum, for the "how to" video:
The same post has info and links to more info about NewCS, how to configure it!!!
newcamd.cfg
## MAX Support the 12 of Serverlist by this CFG file
## N: Hostname port username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
priocaid.cfg - to improve the MultiCAS speed and stability
### 0100 : SECA
### 0500 : VIACESS
### 06xx : IRDETO
### 0dxx : CRYPTOWORKS
### 0bxx : CONAX
### 09xx : NDS
### 17xx : BETACRYPT
### 18xx : NAGRA
###----------------------------------------------------
### max 8 of caid 0100 0500 0600 0900 1800 0d00 0b00 1700
###----------------------------------------------------
### CASE OLD #1 0600 0d00 1700 1800 0900 0b00 0100 0500
### CASE OLD #2 0100 1800 0500 0600 0d00 1700 0b00 0900
###---------------------------------------------------
0100 1800 0500 0600 0d00 1700 0b00 0900
I checked the 1+1 and TET on sirius and it doesnt open.
the keys are ok in the file.
Hmmm, interesting... No go at my end, too... We need to report this...
And investigate a bit... You know, have fun messing about... ;)
1+1 Inter is at Index 29, Prov. 00 1F FF and
TET is Index 17, Prov. 00 1F FF
christiffa25
08-08-2011, 10:00
Gr8 tutorial, but a little question here?
I like doing as much as possible via romote and downloading straight onto box.
How come there is no mention of installing cccam in the tutorial? I understand installing multicas via the remote and then going into settings to set up as client as stated in tutorial but do I not need cccam downloaded onto my box aswell? Bit confused being a neewb!
Any help appreciated guys cheers
Point E says you do not need CCcam.
Just do as described, without cutting corners!
See my "Alternative guide..." for more info...:cool:
christiffa25
09-08-2011, 10:58
Iv done as described without cutting corners option 2 all with the remote and it won't seem to work?
I am a neewb so could be missing something here...
When I go into smart card splitter and cs and put in required info it just keeps saying login failed. I have been trying alot of the free cs stuff available on line as to just test really if I have set up correct but none seem to work just keep getting login failed
Any clues as to what I'm doing wrong?
You should read my "Alternative guide..." and do it all from scratch, learning in the process... Test MultiCAS is working with publicly available keys -> TV Globo at 13'E.
Secondly, when it is working for sure, you need to learn more about CS - forget free CS! - buy a subscription and exchange with people...
Then, it will work!!!;)
Good luck!:cool:
christiffa25
09-08-2011, 19:19
Ok cheers multicas is working on tv globe and a few others. Can I do everything I need to do on remote and direct downloads onto azbox these days?? Just I got a problem with azbox password so can't FTP with box
And just meaning as a starting point here mainly to test if working and what I can do b4 I start proper cs with others, do I have to create that account with dyndns and set up ports and the router settings ect in order to be able to go through multicas - smartcard splitter &cs - client cccam putting in some others info to see some colours!! ??
Sorry to be a pain and a neewb, but my head is starting to hurt!
Read my "Alternative guide..."
Don't cut corners.
Learn!:cool:
vBulletin® v3.8.2, Copyright ©2000-2012, Jelsoft Enterprises Ltd.