sunny175
07-10-2009, 08:18
Hello LilleMama, Gorski, Moderators and Friends;
Thanks for your great contributions to this cardsharing community. I have some questions for you if you would not mind.
Here I go:
1. What command line should I use and what file should I modify to programme AZbox so that, in the VFD Display, I can see channel numbers and names together? The technical specifications of the receiver says that its VPD displays in Alpha numeric style”.
2. My MultiCas can not load any data from Softcam.key. In the “CCcam.cfg" file I have the following configurations. I have deleted the "#" sign in CCcam.cfg file. And I have also put the corresponding files in the same directory:
SOFTKEY FILE : /EMU/OpenXCAS/keys/SoftCam.Key
AUTOROLL FILE : /EMU/OpenXCAS/keys/AutoRoll.Key.
But executing the appropriate command in TELNET, the information below shows me that file configuration is okay:
192[~]$ 04:05:52.194 CCcam:
================================================== ==============
04:05:52.199 CCcam:
================================================== ===============
04:05:52.206 CCcam: online using nodeId fb91010b3fdc890f
04:05:52.255 CCcam: read config: cannot open /var/tuxbox/config/newcamd.conf or not found
04:05:52.257 CCcam: dvb api3 detected
04:05:52.268 CCcam: DM8000 detected
04:05:52.268 CCcam: create 8 cam device(s)
04:05:52.351 CCcam: added 333 keys from /EMU/OpenXCAS/keys/SoftCam.Key
04:05:52.418 CCcam: added 431 keys from /EMU/OpenXCAS/keys/AutoRoll.Key
04:05:52.419 CCcam: static cw not found or bad
05:07:32.739 CCcam: parsed 68 entries from /EMU/lib/CCcam.prio
05:07:32.869 CCcam: added 809 provider names from /EMU/lib/CCcam.providers
05:07:38.041 CCcam: added 5701 channel names from /EMU/lib/CCcam.channelinfo
04:05:52.424 CCcam: server started on port 13000
Note: These information depends on how you edit the file "CCcam.cfg".
What else can I do so that MultiCas starts to function well? The last line of the TELNET information shows that my server port opens at 13000. Should I use 13000 or the default port (12000) in my CCcam.cfg file?
3. What can I do so as to view the content of "Lib" directory just as I can see and make choice in OpenXCas? Whenever I select EMU/Lib the screen goes black.
4. In my AZbox receiver, from: Setup/Network service/File server/setting, I have the following configurations:
workgroup - AZBOX
server - 192.168.1.33
account - root
password - azbox
Is the above configuration correct? Is it the same password and username (root) that I should enter in my "CCcam.c.cfg" file and share with friends?
5. Finally, In my AZbox receiver, from: Setup/Network service/Dynamic DNS/setting, I have not entered anything yet:
DNS system - ?
Host Name - ? should this be something like this: "beginner.dyndns.com"?
User name - ?
password - ?
Note, here in question 5, It may not be correct to share the username and password given to me to access "dyndns.com" homepage. But if I create a new Username and Password, will they be the same that I should enter in question 4, and in my CCcam.cfg file and also share with friends?
I’m very glad for your attention.
Warm regards,
Sunny (Spain).
Thanks for your great contributions to this cardsharing community. I have some questions for you if you would not mind.
Here I go:
1. What command line should I use and what file should I modify to programme AZbox so that, in the VFD Display, I can see channel numbers and names together? The technical specifications of the receiver says that its VPD displays in Alpha numeric style”.
2. My MultiCas can not load any data from Softcam.key. In the “CCcam.cfg" file I have the following configurations. I have deleted the "#" sign in CCcam.cfg file. And I have also put the corresponding files in the same directory:
SOFTKEY FILE : /EMU/OpenXCAS/keys/SoftCam.Key
AUTOROLL FILE : /EMU/OpenXCAS/keys/AutoRoll.Key.
But executing the appropriate command in TELNET, the information below shows me that file configuration is okay:
192[~]$ 04:05:52.194 CCcam:
================================================== ==============
04:05:52.199 CCcam:
================================================== ===============
04:05:52.206 CCcam: online using nodeId fb91010b3fdc890f
04:05:52.255 CCcam: read config: cannot open /var/tuxbox/config/newcamd.conf or not found
04:05:52.257 CCcam: dvb api3 detected
04:05:52.268 CCcam: DM8000 detected
04:05:52.268 CCcam: create 8 cam device(s)
04:05:52.351 CCcam: added 333 keys from /EMU/OpenXCAS/keys/SoftCam.Key
04:05:52.418 CCcam: added 431 keys from /EMU/OpenXCAS/keys/AutoRoll.Key
04:05:52.419 CCcam: static cw not found or bad
05:07:32.739 CCcam: parsed 68 entries from /EMU/lib/CCcam.prio
05:07:32.869 CCcam: added 809 provider names from /EMU/lib/CCcam.providers
05:07:38.041 CCcam: added 5701 channel names from /EMU/lib/CCcam.channelinfo
04:05:52.424 CCcam: server started on port 13000
Note: These information depends on how you edit the file "CCcam.cfg".
What else can I do so that MultiCas starts to function well? The last line of the TELNET information shows that my server port opens at 13000. Should I use 13000 or the default port (12000) in my CCcam.cfg file?
3. What can I do so as to view the content of "Lib" directory just as I can see and make choice in OpenXCas? Whenever I select EMU/Lib the screen goes black.
4. In my AZbox receiver, from: Setup/Network service/File server/setting, I have the following configurations:
workgroup - AZBOX
server - 192.168.1.33
account - root
password - azbox
Is the above configuration correct? Is it the same password and username (root) that I should enter in my "CCcam.c.cfg" file and share with friends?
5. Finally, In my AZbox receiver, from: Setup/Network service/Dynamic DNS/setting, I have not entered anything yet:
DNS system - ?
Host Name - ? should this be something like this: "beginner.dyndns.com"?
User name - ?
password - ?
Note, here in question 5, It may not be correct to share the username and password given to me to access "dyndns.com" homepage. But if I create a new Username and Password, will they be the same that I should enter in question 4, and in my CCcam.cfg file and also share with friends?
I’m very glad for your attention.
Warm regards,
Sunny (Spain).