weird problem astra 2 on 28.2

[Vampier]

i have a weird problem whit my DB600

I have a viosat dish whit 4 duo lnb'd to 2 DiSEqC switches (4way)
than the 2 cables goes to my DB7025
from there on line out from tuner 1 goes a cable to my DB600 upstairs
and i have load a settinglist from
astra 1
hotbird
astra 2
astra 3
but when i choose astra 2 sky channels he said service not found
after that i rescan the transponder and than he finds all the 28.2 channels on 28.4
how is that possible ?
als the singal en strengt ara arround 90% from all lnb's
has someone any idee


btw the image on the box = Nabilosat Enigma1 DarkStar II - DM600


Regards Vampier

[tvroman]

Even though you know that both positions 28.2 and 28.4 refer to the same satellite, they are stored internally with different identities.

If you mix settings that expect one position with settings that expect another, for instance by downloading a group of settings, the entire group of channels will not be found because the settings will refer to a position that isn't actually recorded in your satellites.xml file.

I had this problem with 28.2 recently. All the bouquets referred to an essentially non-existant satellite.

The bouquets that had the bad entries were like this:
#SERVICE: 1:0:1:1a30:7dd:2:11a0000:0:0:0:

whereas the newly searched ones had
#SERVICE: 1:0:1:1a30:7dd:2:11c0000:0:0:0:

IF you look at these in HEX, you will see that 0x11a = 282 and 0x11c = 284.

Technically you could adjust them all with a text editor

tvroman