Latest Pli® image for db 500

[LilleMama]

The Original PLi® Helenite suite includes the following components:
Enigma 26-03-2007
Latest Dreamfiles and Dreamdrivers
Tuxtxt v1.99
Web Interface: 5.9.7-Expert - PLi edition
The Original PLi® Helenite suite contains the following images:
PLi®-Helenite-DM500-20070417-2696
PLi®-Helenite-DM56x0-20070417-2696
PLi®-Helenite-DM600-20070417-2696
PLi®-Helenite-DM7000-20070417-2696
PLi®-Helenite-DM7020-20070417-2696
Use the download URL below to be sure to download our original PLi® images.
PLi® Helenite images
See below for whats New, Fixed & Features
Kernel:
- Enable kernel nfs server for dm7000/7020 (FAQ will be available later)
Enigma:
- Complete new Enigma menu with complete new menus.
- Integrated PLi image setup into the new Enigma menu
- Fixed HDD/CF detection on dm7020
- Get skin now/next from EPGcache (till EIT arrives)
- Show skin streaminfo again in filemode
- Improved movieplayer performance and stability
- Auto audiotrack selection now avoids AC3, if AC3 not preferred
- 7020 and 600: Added possibility to reboot in **STOP** mode, from 'software update' menu
Mount manager:
- Mount manger is now a dynamic list and stays active all time
- Webinterface only shows defined mounts and has an ADD button again
- OSD interface shows mount status
- OSD interface mount/unount is one button with function depending on mount status
- OSD interface has new button to create a new mountpoint
- Added network mounts in file mode screen
- Added network mounts in several setup screens
- Added network mounts in webif/movie menu
- Made network mounts less picky for trailing slashes
Multiepg:
- Add EPG category coloring
Timezones:
- Update timezone info to 2007c
- First look in /var/etc/for a timezone.xml file
- Also check in /var/share/timezone for timezone files
- This way users can update/add timezone files themselfes
Multimedia:
- MPG/MP3 playback: fixed most crashes and hickups
- Support for RRAS (german channels SWR3, Das Ding & Cont.ra)
Startup:
- Improved network mount process during boot
DBEPG plugin:
- Use enigma epg database locations
- Remove datafiles after importing them
Log/Debuging:
- Add timestamps to all enigma debug/warning messages
Fixes:
- Motorsetup was not always possible
- Mounting after formatting was not always correct
- Mountmgr in OSD was not always showing correct info
- EPG storage location
- Webif EPG screens for foreign characters
- Ipkg install in Setup plugin
- CF card detection in multiboot
- Preferred audio language setup (matches also part of the audio name)
- Czech preferred audio for Czech Link
Changes:
- Cifs v1.45
- Recordings.epl can now be shared by multiple boxes
- Due to the changes for recordings.epl the web call reloadRecordings is now obsolete
- Parental lock has been changed
- Pin code check can be valid for x time so user won't have to enter pin each time
- Pin check can be disabled for x time after x times invalid pin entered
- Pin of 0000 is now also valid, let the user decide what pin he wants
- Mount.conf has been changed, therefore it is not always compatible to previous versions
- Mountnames in /mnt have been changed
- Now obey the setting 'Timer stop offset' also when pressing record button second time to schedule duration or stoptime on current recording
- LCD display does not show seconds anymore
- Optimize radiotimes (db_epg) script
- Added ftpput/ftpget
- Dm7020: Support swapfile on mounted device (mount first, then swapon)
- NA (E)EPG: some minor fixes
- Optimalisations for the Webstream2DB plugin
- Updated Dutch translations
Known issues:
- German and Frisian languages are not up to date
- When network share servers are unavailable booting the dreambox may take quite long or amy not seem to boot at all.
Many low level changes fixes and other updates...

DOWNLOAD ()

[LilleMama]

The Original PLi Helenite Final suite includes the following components:

Enigma 26-03-2007
Latest Dreamfiles and Dreamdrivers
Tuxtxt v1.99
Web Interface: 6.0.2-Expert - PLi edition

The Original PLi Helenite Final suite contains the following images:

PLi-Helenite-DM500-20070709-3223
PLi-Helenite-DM500-Old-Framebuffer-20070709-3223
PLi-Helenite-DM56x0-20070709-3223
PLi-Helenite-DM600-20070709-3223
PLi-Helenite-DM7000-20070709-3223
PLi-Helenite-DM7020-20070709-3223



PLi Helenite Final images...

See below for whats New, Fixed & Features since PLi Helenite RC


Kernel:- Update of Dreambox-DVB-modules, new driver for DM600
- For the DM500 now two images are built
The default with the current driver, and the same image again but with the old framebuffer driver


Enigma:
- Softcam setup: immediately start default softcam at bootup (instead of waiting for scrambled channel)
- Added "time sync method" setting, allowing to ignore transponder time (and rely on system time instead)
- Added 'zapstream' support (thanks to Sjaaky)
- Added syslog support for enigma
- Fixed showing marker in second column of serviceselector
- Added support for autostart plugins (type 4)
- Added support to register an external player to a file extension or directory name (plugin type 5)
For example: now you can play DreamDVD without any further plugin
- Show radio button for record in help screen while in dvr mode.
- Updated cifs in kernel to 1.45
Now it is also possible to use cifs to connect to samba server of a DM7000
- Added 'Disable background scanning' in Satellites and Transponders


Languages:- Added Arabic support
- Arabic translations (thanks to Adel)
- Added Chinese support
- Chinese translations (thanks to mygod)
- Czech translations (thanks to ims)
- French translations (thanks to secaviar)
- Frysk translations (thanks to gerrit)
- German translations (thanks to Quest)
- Lithuanian translations (thanks to Adga)
- Polish translations (thanks to adik2)
- Swedish translations (thanks to hutten)
- Turkish translations (thanks to Kerem)


Skins:- Added (background)pixmap support to eProgress
- Added "eVideoWidget" support (skinnable PiG)
- Added "menu.background" pixmap support for skin
- PLicons removed from image, now available in our Software Management


Plugins:- CCcam: Update built-in SoftCam for 500 and 56x0 to version 2.0.0
- MGcamd kill script fixed


NFS server:- Added nfs utils and portmap to flash image
- Addes nfs.sh script for DM7000
- All the user has to do now is create a /var/etc/exports file and start the
nfs server (manually with nfs.sh or through enabling nfs server in setup)


Mount manager:
- Complete new recording location approach: removed link /var/media/movie and use key /pli/mediaMapping/movies now


MultiEPG: - Changed MediaPLi genre colors
- Changed number of channels and font size in MultiEPG
- Fixed remembering last zapped channel


DB EPG plugin: - Fixed cron support
- Added config files for rt and wolf


Support:- Online update support (ipkg feed) for OE boxes (7020/600)
- Openvpn support for OE boxes (7020/600)
- NTP support for OE boxes (7020/600)
- Upgrade of SQLite to version 3.3.16
- DVD kit / Burn2DVD plugin support
- Global up to date satellites.xml added


General fixes: - Avoid /var/log/wtmp growing too big
- Fixed mountmanager "not mounted" bug for DM600 and DM7020
- Added /mnt/nfs again for use with Flashwizzard
- Fixed if no harddisk could be found
- Fixed starting spinning of the harddisk when the PLi setup was entered
- Fixed some bugs in "recording and playing"
- Added update period in inadyn plugin
- Fixed wrong character in Polish EPG
- Fixed recording device bug when /var was on a FAT formatted USB stick
- Fixed detection of harddisks and USB sticks formatted without partitions
- Minor fix in swap file and move /var menu
- Solved cause of "[EPGSQL] skipped update of record in services table" log message
- Fixed problem with starting scheduled recording while watching another recording which was paused
- Prevent memory exhaustion due to large epg.dat. If epg.dat is larger than 5 MB, it is not read
- Fixed now/next update in OSD and EPG viewers
- Fixed problem adding a marker when recordings.epl was not locked
- Fixed problem with starting scheduled recording while watching another recording which was paused
- Fixed problem when browsing in filemode not the correct date/time was shown
- Fixed problem when adding a timer through EPG in WebIf the start and stop offset was not being used
- Fixed Internet update fails when /var was on USB
- No firewall on OE boxes (DM600/DM7020) fixed


Many low level changes fixes and other updates...

DOWNLOAD ()

[LilleMama]

The Original PLi® Iolite suite contains the following images:

PLi®-Iolite-DM500 ( Linked here )
PLi®-Iolite-DM500-Old-Framebuffer
PLi®-Iolite-DM500Plus
PLi®-Iolite-DM56x0
PLi®-Iolite-DM600
PLi®-Iolite-DM7000
PLi®-Iolite-DM7020
PLi®-Iolite-DM7025


See below for what's New, Fixed & Features since PLi® Helenite Final




Kernel:
- Swap support for DM500 added


Enigma1:
- CVS Repository 21 Nov 2007
- PLi® Repository 04 Dec 2007
- 28 Nov 2007 Drivers for DM500Plus and DM600
- Shuffleplay for MP3, MPG and JPG added
- Make Web-X-TV obey 'zapstream' setting
- Genre colors now as small bar
- Now/next updates in the OSD fixed
- Show Event Info instead of EPG selector, when info is pressed in the Filemode service selector
- Show Extended EPG Info at the bottom of the serviceselector screen
- 16bit Picviewer for DM600 and DM500Plus added
- BEV EPG support fixed, a BIG thx to updatelee
- DISH EEPG setting now also controls BEV
- Blindscan support for DM500Plus and DM600 added
- Section timeout fixed (fixes various EPG issues)
- 'Remove all new found flags' option added
- 'last scanned' services ordering fix
- /var_flash was not mounted after a Flash Erase on the DM7000 fixed
- Give the CDK boxes their own hosts file for SMB to work
- Newsticker in StopMode fixed
- The DM500, DM56xx and DM7000 have the same mount points as the newer Dreamboxes like DM600 and DM7020. Harddisk, USB and CF are mounted on /media/hdd etc. External mounts are mounted on /media/server1 etc. Just as in the DM600 and DM7020, there are still compatibility links to /hdd and /mnt.
- Improved and restyled Web-X-TV
- Title tags for Web-X-TV added


Enigma2:
- CVS Repository 06 Dec 2007
- PLi® Repository 04 Dec 2007
- Wraparound in Menu's
- Basic PPanel support
- Zap with PIP
- USB stick automount
- Immediately save changes in Timer List
- Dream keyboard support in text config items
- Support for relative skin coordinates ( 'c' and 'e' )
- Console 'close on success' in several install screens
- Console scrolls to the bottom as new text arrives
- Initializing / Formatting Compact Flash card fixed
- Dutch frequencies in terrestrial.xml added
- Frisian language added
- Stay in plugin install screen after install, for faster installation of multiple plugins
- Fixed showing 'West' satellite names and positions, in Satellite Channel Selection screen


IPKG Packages available on the OpenEmbedded images:
- Openssh added
- Openvpn added
- Gdb added
- Lame added
- Ctorrent added
- USB2Serial kernel drivers for the DM70x0 and DM7025


Enigma2 Plugins:
- NFSserver
- Mountmanager (based on Ronaldd's code)
- Bitrate Viewer
- RSS Reader
- Lipsync Adjust
- Antilogo
- Softcam Setup incl. CardInfo
- Nano Editor
- Tuxterm uses an US keyboard layout


Zapstream:
- Fixed streaming over Wifi
- Fixed 'no audio' bug
- Configuration file support added (/var/etc/zapstream.conf or /etc/zapstream.conf)
- Audio channel priority added
The preference language is read from the following source. In order of importance:
1) The 'lang=Eng' or 'langpid=0x5c' parameter in the url
2) Zapstream.conf
3) The enigma config file


Skins:
- New Enigma1 skin widget: 'prov_name' for the providername
- New Enigma1 skin widget: 'softcam_info', it shows you the ECM info, example:
<eLabel position="49:30" size="250:18" font="def;18" foregroundColor="tekst" backgroundColor="mainBgColor" name="softcam_info" />
- New Enigma1 skin widget: 'date' (like time)
- Enigma1 skin: the datestring can be configured for the OSD, example

<value name="date.format " value="X" />

Via the value "X" the time can be shown in several ways depending your 24hour or USA (AM/PM) timesetting.

X in the OUS way:
0: Mo, 24 Jan
1: Monday, 24 January
2: Monday 24-01
3: Monday 24.01
4: 24-01
5: 24.01

X in the USA way:
0: Mo, Jan 24
1: Monday, January 24
2: Monday 01-24
3: Monday 01.24
4: 01-24
5: 01.24

X + 8 will show you the year extra, example:
9 OUS: Monday, 24 January 08

X + 16 will show you the full year extra, example:
17 OUS: Monday, 24 January 2008


SQLite:
- Updated to version 3.5.2


DBEPG plugin:
- Channels.dat updated
- 'assies' as Dutch xmltv provider added (wolf seems to be down for a long time already)
- DBEPG, rt_uk script: Download latest channels.dat to current channels.dat location, instead of /tmp


Support:
- Online update support (IPKG feed) for OpenEmbedded boxes (DM500Plus/DM600/DM7020/DM7025)
- Global satellites.xml updated 22 Nov 2007



Many low level changes fixes and other updates...

DOWNLOAD ()

[LilleMama]

The Original PLi® Iolite suite contains the following images:
PLi®-Iolite-DM500
PLi®-Iolite-DM500-Old-Framebuffer (Linked here )
PLi®-Iolite-DM500Plus
PLi®-Iolite-DM56x0
PLi®-Iolite-DM600
PLi®-Iolite-DM7000
PLi®-Iolite-DM7020
PLi®-Iolite-DM7025

See below for what's New, Fixed & Features since PLi® Helenite Final


Kernel:
- Swap support for DM500 added

Enigma1:
- CVS Repository 21 Nov 2007
- PLi® Repository 04 Dec 2007
- 28 Nov 2007 Drivers for DM500Plus and DM600
- Shuffleplay for MP3, MPG and JPG added
- Make Web-X-TV obey 'zapstream' setting
- Genre colors now as small bar
- Now/next updates in the OSD fixed
- Show Event Info instead of EPG selector, when info is pressed in the Filemode service selector
- Show Extended EPG Info at the bottom of the serviceselector screen
- 16bit Picviewer for DM600 and DM500Plus added
- BEV EPG support fixed, a BIG thx to updatelee
- DISH EEPG setting now also controls BEV
- Blindscan support for DM500Plus and DM600 added
- Section timeout fixed (fixes various EPG issues)
- 'Remove all new found flags' option added
- 'last scanned' services ordering fix
- /var_flash was not mounted after a Flash Erase on the DM7000 fixed
- Give the CDK boxes their own hosts file for SMB to work
- Newsticker in StopMode fixed
- The DM500, DM56xx and DM7000 have the same mount points as the newer Dreamboxes like DM600 and DM7020. Harddisk, USB and CF are mounted on /media/hdd etc. External mounts are mounted on /media/server1 etc. Just as in the DM600 and DM7020, there are still compatibility links to /hdd and /mnt.
- Improved and restyled Web-X-TV
- Title tags for Web-X-TV added

Enigma2:
- CVS Repository 06 Dec 2007
- PLi® Repository 04 Dec 2007
- Wraparound in Menu's
- Basic PPanel support
- Zap with PIP
- USB stick automount
- Immediately save changes in Timer List
- Dream keyboard support in text config items
- Support for relative skin coordinates ( 'c' and 'e' )
- Console 'close on success' in several install screens
- Console scrolls to the bottom as new text arrives
- Initializing / Formatting Compact Flash card fixed
- Dutch frequencies in terrestrial.xml added
- Frisian language added
- Stay in plugin install screen after install, for faster installation of multiple plugins
- Fixed showing 'West' satellite names and positions, in Satellite Channel Selection screen

IPKG Packages available on the OpenEmbedded images:
- Openssh added
- Openvpn added
- Gdb added
- Lame added
- Ctorrent added
- USB2Serial kernel drivers for the DM70x0 and DM7025

Enigma2 Plugins:
- NFSserver
- Mountmanager (based on Ronaldd's code)
- Bitrate Viewer
- RSS Reader
- Lipsync Adjust
- Antilogo
- Softcam Setup incl. CardInfo
- Nano Editor
- Tuxterm uses an US keyboard layout

Zapstream:
- Fixed streaming over Wifi
- Fixed 'no audio' bug
- Configuration file support added (/var/etc/zapstream.conf or /etc/zapstream.conf)
- Audio channel priority added
The preference language is read from the following source. In order of importance:
1) The 'lang=Eng' or 'langpid=0x5c' parameter in the url
2) Zapstream.conf
3) The enigma config file

Skins:
- New Enigma1 skin widget: 'prov_name' for the providername
- New Enigma1 skin widget: 'softcam_info', it shows you the ECM info, example:
<eLabel position="49:30" size="250:18" font="def;18" foregroundColor="tekst" backgroundColor="mainBgColor" name="softcam_info" />
- New Enigma1 skin widget: 'date' (like time)
- Enigma1 skin: the datestring can be configured for the OSD, example
<value name="date.format " value="X" />
Via the value "X" the time can be shown in several ways depending your 24hour or USA (AM/PM) timesetting.
X in the OUS way:
0: Mo, 24 Jan
1: Monday, 24 January
2: Monday 24-01
3: Monday 24.01
4: 24-01
5: 24.01
X in the USA way:
0: Mo, Jan 24
1: Monday, January 24
2: Monday 01-24
3: Monday 01.24
4: 01-24
5: 01.24
X + 8 will show you the year extra, example:
9 OUS: Monday, 24 January 08
X + 16 will show you the full year extra, example:
17 OUS: Monday, 24 January 2008

SQLite:
- Updated to version 3.5.2

DBEPG plugin:
- Channels.dat updated
- 'assies' as Dutch xmltv provider added (wolf seems to be down for a long time already)
- DBEPG, rt_uk script: Download latest channels.dat to current channels.dat location, instead of /tmp

Support:
- Online update support (IPKG feed) for OpenEmbedded boxes (DM500Plus/DM600/DM7020/DM7025)
- Global satellites.xml updated 22 Nov 2007

Many low level changes fixes and other updates...

DOWNLOAD ()

[LilleMama]

PLi® Iolite 2008 Images Suite 20071230 Rev.4014
The Original PLi® Iolite 2008 suite contains the following images:
PLi®-Iolite-DM500
Use the download URL below to be sure to download our original PLi® images.
PLi® Iolite images...

See below for what's New, Fixed & Features since PLi® Iolite

Enigma1:
- CVS Repository 21 Nov 2007
- PLi® Repository 30 Dec 2007
- DVB subtitling: utterly revamped page composition handling. It is even improved upin in relation to the Helenite version!
- Softcam Setup: don't restart cardserver when 'restart cam' is pressed (cardserver has its own restart button)
- Softcam setup: wait 5secs between starting Cardserver and Softcam
- Rotor WebIf: goto and store require hexadecimal position
- Remove all 'new found' flags fixed
- Softcam script fix. Make it more readable and less error prone
- Various packages installed in /boot: only remount /boot if it is a separate partition (should fix problems with multiboot situations)
- Fixed NFS server (No download needed anymore)
- Old mountpoints /mnt/... are automatically translated to the new mountpoint /media/...
- Compact flash and USB devices as recording media added
- Smaller network mount descriptions
- Movie directory is automatically created if it didn't exist
- Enigma EPG 5MB filesize limit can be disabled now
Enigma1 OpenEmbedded:
- Compatibility symlink /dev/fb0 for the DM7020 added
- Don't show 'swap' menu, swap is not actually created / used
- Don't show cron in 'services' setup
- Stbup & config file added
- Fixed software management for DM500+, DM600 and DM7020
- Fixed PPanel recovery for the DM600

Enigma2:
- CVS Repository 25 Dec 2007
- PLi® Repository 30 Dec 2007
- 20071128 drivers for DM7025
- IE fix for WebIf
- Setting to disable the 'spinner' added (busy animation)
- PPanels:
- 'condition' attribute fixed
- implemented (basic) 'tarball' element support
- SoftwareUpdate plugin: added confirmation messagebox before starting the update
- Mountmanager: default share 'hdd' instead of '/media/hdd'

Enigma 1& 2 Plugins:
- Softcam downloads: use our own newcs.xml and newcamd.conf so they work out of the box

Enigma2 Plugins:
- MovieRetitle plugin added
- Emailclient added
- Opencam SoftCam added
- Lastfm seems to be fixed
- Dyndns added

Skins Enigma2:
- Default picon size 70x53
- Updated picons: Canvas, Veronica, Animal Planet, Eurosport added
- Nemesis.BlackBox added
- Orbital position convertor added

EPG plugin:
- Don't mark all services 'seen', after receiving an MHW update. This allows us to still receive now/next EIT for those services. Now/next is usually more detailed than MHW

Mounts:
- Smaller &quot;long description&quot; for network mounts
- Mountmanager now translates each mount point to a recommended mount point (/media/...)

Support:
- Online update support (IPKG feed) for OpenEmbedded boxes (DM500Plus/DM600/DM7020/DM7025)
- Global satellites.xml 22 Nov 2007

Many low level changes fixes and other updates..

DOWNLOAD ()

[sotiris70]

A new PLi® Dreambox release is available for download.

This image release fixes some bugs and annoyances found in the initial Iolite release.

The Original PLi® Iolite 2008 suite contains the following images:

PLi®-Iolite-DM500 ( Linked here )
PLi®-Iolite-DM500-Old-Framebuffer
PLi®-Iolite-DM500Plus
PLi®-Iolite-DM56x0
PLi®-Iolite-DM600
PLi®-Iolite-DM7000
PLi®-Iolite-DM7020
PLi®-Iolite-DM7025


See below for what's New, Fixed & Features since the initial PLi® Iolite release


Enigma1:
- CVS Repository 21 Nov 2007
- PLi® Repository 30 Dec 2007
- DVB subtitling: utterly revamped page composition handling. It is even improved upin in relation to the Helenite version!
- EPG: Don't mark all services 'seen', after receiving an MHW update. This allows us to s! till receive now/next EIT for those services. Now/next is usually more detailed than MHW
- Softcam Setup: don't restart cardserver when 'restart cam' is pressed (cardserver has its own restart button)
- Softcam setup: wait 5secs between starting Cardserver and Softcam
- Rotor WebIf: goto and store require hexadecimal position
- Remove all 'new found' flags fixed
- Softcam script fix. Make it more readable and less error prone
- Various packages installed in /boot: only remount /boot if it is a separate partition (should fix problems with multiboot situations)
- Fixed NFS server (No download needed anymore)
- Old mountpoints /mnt/... are automatically translated to the new mountpoint /media/...
- Compact flash and USB devices as recording media added
- Smaller network mount descriptions
- Movie directory is automatically created if it didn't exist
- Enigma EPG 5MB filesize limit can be disabled now


Enigma1 OpenEmbedded:
- Compatibility symlink /dev/fb0 for the DM7020 added
- Don't show 'swap' menu, swap is not actually created / used
- Don't show cron in 'services' setup
- Stbup & config file added
- Fixed software management for DM500+, DM600 and DM7020
- Fixed PPanel recovery for the DM600
- You can update from the initial Iolite to this Iolite '2008 editon' via telnet:

1:ipkg update
2:ipkg upgrade

and reboot your box


Enigma2:
- CVS Repository 25 Dec 2007
- PLi® Repository 30 Dec 2007
- 20071128 drivers for DM7025
- IE fix for WebIf
- Setting to disable the 'spinner' added (busy animation)
- PPanels:
- 'condition' attribute fixed
- implemented (basic) 'tarball' element support
- SoftwareUpdate plugin: added confirmation messagebox before starting the update
- Mountmanager: default ***** 'hdd' instead of '/media/hdd'
- 'Pr! eferred tuner' setting implemented


Enigma 1& 2 Plugins:
- Softcam downloads: use our own newcs.xml and newcamd.conf so they work out of the box


Enigma2 Plugins:
- MovieRetitle plugin added
- Emailclient added
- Opencam SoftCam added
- Lastfm seems to be fixed
- Dyndns added


Skins Enigma2:
- Default picon size 70x53
- Updated picons: Canvas, Veronica, Animal Planet, Eurosport added
- Nemesis.BlackBox added
- Orbital position convertor added


Mounts:
- Smaller &quot;long description&quot; for network mounts
- Mountmanager now translates each mount point to a recommended mount point (/media/...)


Support:
- Online update support (IPKG feed) for OpenEmbedded boxes (DM500Plus/DM600/DM7020/DM7025)
- Global satellites.xml 22 Nov 2007


Many low level changes fixes and other updates...

Detailed info, Wiki, FAQ's, HowTo's, TechNotes and information about this and the previous PLi® releases can be found on the PLi® Website

()

[pumuckl]

PLi-Jade - for the Dreambox DM500

Highlights:
- EPG Search added
- Complete redesigned backup/restore menu
- Fully programmable Blue and Yellow buttons to any menu or Plugin/PPanel
- Complete redesigned network mount screen
- New movieplayer plugin as a full and better replacement for the VLCF plugin
- Permanent timeshift integrated in recording and playing menu
- Global worldwide Picon Sets added per Satellite / Provider


Enigma1:
- CVS Repository June 29th 2008
- PLi® Repository July 18th 2008
- RC repeat fix
- Build non-LCD boxes without DISABLE_LCD, so binary plugins will work
- Don't shut the box down on fatal Enigma errors
- Enabled TimeShift for DM600
- 2nd stage bootloader: Auto reboot after flashing nfi (DM500+ DM600, DM7020)
- Improved BER
- Auto Adjust AGCR1 to improve BER after tuning (yet only available via the registry)
- Disabled fast zapping for DM500 and DM56x0
- Mount network mounts as first step so EPG can be on a network mount


Plugins:
- Build Streamts with large file support
- Install movieplayer by default on all boxes


General openembedded images:
- Several ipkg improvements, speedups and bugfixes
- Ushare and djmount (uPnP mediaserver and client) added


Drivers:
- Added keyspan usb2serial driver (DM7020)


Skins:
- ePicon widget added, used by skin and multiepg
* (uses serviceref piconnames, auto resizes picons to specified dimensions)
- X-Line skin updated
- Global worldwide Picon Sets added per Satellite / Provider


SQLite:
- Updated to version 5.3.9


Network Mounts Fixes:
- If a network mount is edited in the web interface, it's automatically unmounted
- Use udhcpc config/deconfig script
* This solves the problem samba fails to start in case the DHCP assigns another hostname


Network Mounts Features:
- Complete redesigned network mount screen DM7000 allows NFS V3 mounts too
- Support for NAS devices which cannot handle cifs Linux extensions
- /VAR can be easily moved to a network mount


Web Interface Fixes:
- Several in web interface/movie source
- Several in web interface/remote control
- Several in web interface EPG
- PDA webif improvements by Jonc
- Updated working forum links in webif, now containing links to the PLi® wiki


Miscellaneous Fixes:
- Several TuxTXT bugs
- More support for the DMM keyboard at several places
- Better remote control support for fx2 games
- Several fixes for Tetris
- Fixed the unresolved symbols issue for various SoftCams
- Sample PPanel can be uninstalled now
- LCD output for PPanels fixed
- Capacity in harddisk menu fixed
- RSS configuration path
- Improved harddisk detection
- Satellite setup fixes for more then 80 active satellites
- Recording and playing fixes if a network mount is unmounted
- For writing EPG data to a network mount
- Disable PIG on DM500+
- No longer use (part of) the recordingdescription for repeating events
* Just use the current date as additional description
* Extra info will be in the EIT file anyway


Miscellaneous Features:
- Default zapstream for streaming to a PC
- Removed: "Show installed PPanels"
* All PPanels are visible in the plugin screen
- Complete redesigned backup/restore menu
- Support for dropbear in CDK images (DM500/DM56x0/DM7000)
- Permanent timeshift integrated in recording and playing menu
- Forward/backward skipping using the remote control number buttons
- "Blue button" completely integrated with Enigma Setup
- Fully programmable Blue and Yellow buttons to any menu or Plugin/PPanel
* (Removed: PLiKey ppanel)
- EPG Search added
- Added <menu> for PPanel to call any Menu from a PPanel
- Support for opening PPanels using an URL
- Movie directory automatically created and automatic fallback to internal harddisk if anything fails
- New movieplayer plugin as a full and better replacement for the VLCF plugin
- Swap menu added for oe boxes
- Ipkg support in PPanel
- Added DISH LNB setting support in Satellite configuration wizard (at first boot)


OSD Fixes:
- Date in OSD fixes
- Cosmetic changes in the Timer Menu


OSD Features:
- OSD is aligned according to OSD offsets


DM500:
- CCcam Softcam updated to 2.09


Further:
- Thanks to ims for EPG Search, Movieplayer Plugin and several fixes
- Some EPG webif changes by Alphons (we've added it to the CVS repository)
- EPG Search based on Sourceforge Merlin project

Thanks to the PLi testers for several fixes and features


Support:
- Online update support (IPKG feed) for OpenEmbedded boxes (DM500Plus/DM600/DM7020)
- Global satellites.xml updated July 5th 2008

()

[pumuckl]

PLi® Enigma1 500 PLi® Jade Final Images Suite 20081001 Rev.5635

Παράθεση:
See below for what's new & fixed since the initial PLi® Jade RC release



Highlights:
- Satellite.xml split in Ka, Ku, C, S, L band
- Remote control behaviour reverted to pre-Jade
* (Some remotes suffered from very bad reception in the Jade RC)
- North America scan fix by Updatelee
- CDK Flashtool: support flashing between standard partition layout and 'MaxVar' partition layout!
* ('Var' partition is erased when the layout changes)
- Rotor improvement for the OpenEmbedded (OE) boxes


Enigma1:
- CVS Repository June 29th 2008
- PLi® Repository September 29th 2008
- CDK Flashtool: support flashing between standard partition layout and 'MaxVar' partition layout
* ('Var' partition is erased when the layout changes)
- Enigma Movieplayer fixed by ims
- Default sleeptimer now 30 minutes
- Insert and delete character support for DM500 remotes (Red and Green)
* Now Red (delete) en Green (insert) can be used.
* For all other boxes Vol+/Vol- and Red/Green can be used - it does not care...
- Remote control behaviour restored to pre-Jade
- Fixed 'DM7000 style' remote control for DM500
* (Added the ability to use the DM600, 7000, 7020 large remote on your DM500, DM56x0)
- Show serviceselector again with TV/RADIO key, but only if the mode already was TV resp. RADIO.
* Toggling TV/RADIO doesn't bring up the service selector
- Timeshift delay input value limited to 999 instead of 60 seconds
- Timeshift / recording support for DM500+ (settings equal to DM600)
- Rotor improvement for the OpenEmbedded (OE) boxes
* (Smooth start and faster rotating at 18 V, motor stop detection improved)


Plugins:
- Bitrate plugin fixes for NTSC


PPanel:
- Channelsetting reload in PPanel fixed


EPG Features:
- Use audio key for searchEPG in EPG channel


OSD Features:
- OSD transparancy setting in smaller steps for DM500+ and DM600 (5 instead of 25)


Web Interface Fixes:
- Some info in WebIf missing for IE fixed by ims


Network:
- Enable network and DHCP as default in case the Enigma config is not copied from /Var_init
* May fix some move /Var to network issues
- Do NOT add manually created mounts to the Enigma mount.conf
* It can cause double mounts if such a mount was already done in /Var/etc/init


Highlights DM500 MaxVar:
We've created 1Mb extra /Var space for you...
The re items are now available via the PLi® downloads at the Software Management

We rebuilt the internal Flash tool completely!
So now you can flash back and forward between the standard PLi DM500 images and the PLi DM500-MaxVar images without using the serial cable!!!

We advise you to use the 'root.cramfs' method for this!
See the url below on how to Flash your DM500 via the 'root.cramfs' method:

See our DM500 Installation Wiki...

Moved to Software Management downloads:
- MV EPG plugin, Mediapli_8 skin, CCcam SoftCam, Cables/Terrestrial.xml, Translations, Games, traceroute, nslookup, IPtables, Netfilter drivers


Further:
- Thanks to Updatelee for North America scan fix

Thanks to the PLi testers for several fixes and features


Support:
- Online update support (IPKG feed) for OpenEmbedded boxes
* (DM500Plus/DM600/DM7020)
- Global satellites.xml updated September 29th 2008
* (DVB-S: FEC = Automatic; DVB-S2: FEC = Normal; DVB-S2 can't handle auto-FEC)
- Satellites.xml split in Ka, Ku, C, S, L band

See our PLi® Wiki...


Further, our Pli member Jonc created a Wikipedia Tool and PDA WYSIWYG Desktop Application for the PLi Dreambox images

If this DM500 version proves all OK, he will put the other Wikipedia Tools and PDA WebIf version online for the DM56x0, DM500+, DM600, DM7000, DM7020 and the limited E2 wiki.

(link) ()


()

[LilleMama]

[22-03-2009] PLi® Jade2 Enigma1 images released

A new Enigma1 PLi® Dreambox release is available for download.

The Original Enigma1 PLi® Jade2 suite contains the following images:

* PLi®-Jade2-DM500 (regular and maxvar) (link) () (link) ()
* PLi®-Jade2-DM500+ (Plus) (link) ()
* PLi®-Jade2-DM600 (link) ()
* PLi®-Jade2-DM5600/5620 (link) ()
* PLi®-Jade2-DM7000 (link) ()
* PLi®-Jade2-DM7020 (link) ()

Use the downloadsection on our website to be sure to download our original PLi® images.



See below for fixes & features since the initial PLi® Jade release


New features highlights:
- New tuxtxt plugin
- Tuxtxt subtitling (enable tuxtxt caching to get this feature)
- Current and next EPG can be switched in service selector using audio key
- Added "browse" selection in various menus
- Timeshifts can be recorded on a separate location now
- Selectable remote control channel


More new features:
- CVS Repository 11/01/2009
- PLi® Repository 18/03/2009
- Update to CCcam 2.0.11 for normal DM500 image and DM56x0 image
- Default CCcam selected in cam setup for non-maxvar DM500, DM56xx
- Updated encoding.conf
- Removed movieplayer in DM500 maxvar image(image became too large, it's downloadable now)
- Disable AC3, teletext stream recording added
- web-x-tv: added support for vlc 0.9.x
- Automatic LinuxExtensions correction for cifs mounts. Improves NAS compatibilty
- Added teletext as programmable yellow/blue button
- Support for slave harddisk on DM7020


Fixes:
- Web interface timer menu fixes
- Let exit key on a DM500 repeat to quit menus quickly
- Take time start and stop offsets into account if a recording is added using webif
- Fixed the save button (Green button) if unintentionally pressed in sat config screen
- Harddisk format fixes
- Default small silver remote for the DM500 and DM500+
- Zapstream fixes
- Solved wrong genre in webif channel EPG
- "x% in use" updated in filemode now
- Fixed service selector too near to window border
- Fixed possible problems if /var is moved to a network share
- RSS plugin fixes
- Fixed dropbear plugin
- Backup/restore fixes
- MV fix for illegal date/time
- Remove timeshift options for boxes which cannot timeshift


Languages:
- Spanish language update by Corvus
- Estonian language update by Indrek
- Dutch language update by dAF2000
- Czech language update by ims


Known bugs:
- Picons may not work if a satellite has both Ku and C band channels
- Unmounting network shares may not work all times
- Network settings may not be restored in backup/restore

See our PLi® Wiki () for more answers on your questions...

Many low level changes fixes and other updates...

[LilleMama]

[27-06-2009] ALL Enigma1 images are updated, the DM500 Softcam and the Harddisk detection problems are fixed!
Therefore we decided to update all boxtype to the same new revision, 6494.

A new Enigma1 PLi® Dreambox release is available for download.

The Original Enigma1 PLi® Jade3 software suite contains the following images:

* PLi®-Jade3-DM500 (Regular and MaxVar) (link) ()
* PLi®-Jade3-DM600 (link) ()
* PLi®-Jade3-DM5600/5620(DM56x0) (link) ()
* PLi®-Jade3-DM7000 (link) ()
* PLi®-Jade3-DM7020 (link) ()
* PLi®-Jade3-DM500+ (Plus) (link) ()
For all DVB-S, DVB-C and DVB-T versions.

[Lujdzo]

New modefecation image of PLi®Jade3 maxvar BlueSky 20.08.2009 the new: change old skins integration and inside new modefctation and more

New in this imege
-new bootlogo hd
-Change the original skisn of image new skins BlueSky_Pli_By_borsalino 20.08.09
--big var naw <font face="Arial Black">85%</font> Free espace
-add Cccamppanel in image inside(Yellow Button)
-add db-switch in image insidz
-add movieplayer inside
-add sample ppanel (tutorial)
-delet old skins
-add english and arabic and english lonagage in demarage
-add tuxbox commander
-add italian and english Language in demarge
-add option DVR withe help botton
-font size add
-the information od server cccam show big now in skins add size
-add size of time in skins
-Fast image to open channels with Cccam
-option pvr ok withe this modifecation image
-send this image withe <font face="Arial Black">dreamup</font> or <font face="Arial Black">falshwizare</font> ok
and Soon, I would put the skins skins BlueSky_Pli_By_borsalino 20.08.09

in section skisn dream Here are some of the screenshote for this wonderful modifectione image

PLi__174_Jade3_maxvar_BlueSky_Mod_Borsalino_20.08. 2009.rar ( 09.html)

[Lujdzo]

PLi®Jade3 maxvar xline CCcam 2.1.2 Mod_Borsalino 25.10.2009

New modefecation image of PLi®Jade3 maxvar xline CCcam 2.1.2 Mod_Borsalino 25.10.2009 the new: change old skins integration and inside new modefctation & CCcam 2.1.2 inside and more
New in this imege
-new bootlogo hd
-Emu: CCcam 2.1.2 inside (blue panel & softcam setup and save and restart cam )
-Change the original skins of image new skins xline-
-big var naw 85% Free espace
-add Cccamppanel in image inside(Yellow Button)
-add db-switch in image insidz
-add movieplayer inside
-add sample ppanel (tutorial)
-delet old skins
-add english and italy and franch lonagage in demarage
-add option DVR withe help botton
-font size add
-the information od server cccam show big now in skins add size
-add size of time in skins
-Fast image to open channels with Cccam
-option pvr ok withe this modifecation image
-send this image withe dreamup or falshwizard ok
in section skisn dream Here are some of the screenshote for this wonderful modifectione image




PLi_Jade3 maxvar xline CCcam 2.1.2 Mod Borsalino 25.10.2009.rar ( 02009.html)

[antox]

OpenPLi-unstable-dm500-20100112-65.zip



OpenPLi-unstable-dm500-old-framebuffer-20100112-65.

[LilleMama]

release 10.02.2010
=============================
new modification ;

-new bootlogo arabic-sat
-Emu: CCcam 2.1.4 inside (start with image..in blue panel with volume button for the built-Emu )

-send CCcam.cfg in /var/ect with ftp

- Skin xline_Eliote
-Arabic&English&French languages
-big var 84% Free espace with CCcam
-add =Cccam PPanel and Movieplayer also HackSat Keys V9 also Sample PPanel=inside image (Yellow Button)
-send this image with dreamup or falshwizare
-add softcam to open (Art&jsc with CCcam_2.1.4and all biss key ok)
-Fast image to open channels with CCcam
-send this image withe dreamup or falshwizard .

[tasos_elth]

thnx !!:thany:

[LilleMama]

I thank brother Osman for his cooperation on this significant amendment is to give her wonderful beautiful knife and start with God's blessing on the additions of the image

* Change the boot image to the image of the type HD
* Add Arabic language next to English
* Add Emo 2.2.1 away from the area Var
* Add Cccam info in the heart of the image
* Add Ecminfo in the heart of the image
* Add Movieplayer in the heart of the image
* Add Sample PPanel
* Add a knife summit awe Samara1
* Enlarge the fonts to be clear and appropriate to the knife
* Area of a very large VAR
* Add file satellites and the speed of modern research
* Photo missile to open the encrypted Leave your experience

Is passed through Dreamup or flashwizar


I leave you with pictures and download

[beli1910]

PLi Jarde 3 beckUP by macro




Emulators: CCcam 2.2.1, Mgcamd 1.35a peatch Bulsat OK



Sins : XLine (by Marwen, borsalino)

[beli1910]

OpenPLi-beta-dm500-20110416-203.zip


OpenPLi-beta-dm500-old-framebuffer-20110416-203.zip


OpenPLi-beta-dm500-mandarin-20110416-203.zip


OpenPLi-beta-dm500-mandarin-old-framebuffer-20110416-203.zip


OpenPLi-beta-dm500-maxvar-20110416-203.zip


OpenPLi-beta-dm500-maxvar-old-framebuffer-20110416-203.zip

[beli1910]

Image OpenPLi flakes Skinat Apmo wonderful and CCcam 2.2.1 Options
Submit to you today the blessing of God for images OPENPLI BETA on 16 April 2011 version 204 of the official website of serious wear.
To modify the brother wahidbel

With the deletion of both the original and compensated Alskinat b Rihanna Blue



DarkStar and DarkLite and New_Xline

Languages

English and French and Arabic Kufic script

Emo

cccam 2.2.1

Albloginat

CCcam Info or Mgcamd Info
CryptInfo
- MoviePlayer the latest version

- File an interview frequencies










DOWNLOAD - openplicc221-darkstar.rar ()

[beli1910]

8.05.2011

Merged all one, one of the best versions CCcam emu ...
First CCcam 2.1.3 plus:

The integration of these simulations:







Property Patch ... VLC Zapstream and Web-X-tv:








Download now:

[beli1910]

Merged, they all are of the best versions of CCcam emu ...
First to CCcam 2.1.3 plus:

Integration Of These simulations:




( ttp%3A%2F%2Fimg4.immage.de%2F2005880811454.jpg%26% 2391%3B%2Fimg%5D%20%26%2391%3Bimg%5D mg1.immage.de%2F2005792a2841706322.jpg%26%2391%3B% 2Fimg%5D%20%26%2391%3Bimg%5D ge.de%2F20055eb614547725.jpg%26%2391%3B%2Fimg%5D%2 0%26%2391%3Bimg%5D 0549d3553651779.jpg%26%2391%3B%2Fimg%5D%20%26%2391 %3Bimg%5D 9907.jpg%26%2391%3B%2Fimg%5D%20%26%2391%3Bimg%5Dht tp%3A%2F%2Fimg6.immage.de%2F20051a223632365.jpg%26 %2391%3B%2Fimg%5D)






Download Now:







+HD.img.rar/

[beli1910]

PLi® Jade3 _ViP_Validator2_Cccam2.2.1_By Zorro










download:

[beli1910]

I present to you today my Dear brothers ...

Devices Dreambox 500s ...
And TNT with a bunch of French works without problems ...
And also do not need to have a device connected to the network ...
And other additives, as described in the following images



Note

- This is raw (img) will be transferred to the Dream through dreamup or flashwizard

[beli1910]

OpenPLi Turko DM500s GigaBlue Fenerbahce HD E2 skin By meteor



Bu image da CCcam 2.2.1 ve Mgcamd 1.35a birlikte kullanilmistir.

Keys dosyanizi var-keys icine atmaniz yeterlidir.

Guncel KEYS dosyasi BURADA () mevcuttur...


** Kurulumdan once mutlaka yedeginizi aliniz.!!

** Yeni bootlogo kullanilmistir.

** Radyo ve scan logolari degistirilmistir.

** Bu image da kullanilan skinler:

darkpli_8 , mediapli_8 ve GigaBlue Fenerbahce HD E2 skin
skinler tarafimdan editlendi ...


** GigaBlue Fenerbahce HD E2 skin
** darkpli_8
** mediapli_8

** LANGUAGES : Turkish , English , German mevcuttur...
( Diger diller addons dan indirilebilir )

** CCcam 2.2.1 entegredir.

** Mgcamd 1.35a entegredir

** Mgcamd info entegredir.

** Ecminfo entegredir.

** Internet Radio Fenerbahce Ozel Marslari entegredir.

Not : Marslar Fenerbahce taraftar sitesi antu.com dan alintidir...
Emegi gecen arkadaslara TESEKKUR ederiz...

** Server bilgileri ozel menu entegredir.

** Werbezapper entegredir.
( Werbezapper'i 1 ile 9 dk arasýnda ayar yaparak ,
izlediginiz kanala otomatik olarak geri donebilirsiniz...)

** Movieplayer entegredir.

** Teletex mevcuttur.

** Guncel cok uydulu satellite xml kullanilmistir.

** Kanallar help tusu ile yan yana yapilabilir.

** Doluluk orani % 25 dir...



** SADECE DREAM UP ile yukleyiniz..!!!


NOT : Flashwizard ile yuklemek isteyenler once
BURADAN () image yi yukleyip ardindan asil image yi
yine flashwizard ile yukleyebilirler...


--- Image test edilerek foruma verilmistir.
--- Yinede sorumluluk yukleyene aittir.


** Kurulumdan sonra Cccam.cfg yedeginizi var/etc icine atmaniz,
LNB ayarlarinizi yapmaniz ve kanal listenizi yuklemeniz yeterlidir.

Kurulumdan once mutlaka yedeginizi aliniz... :excl:

(Yedeklerinizi her zaman ; CCcam cfg , Kanal listesi
ve backup olarak ayri ayri aliniz.)

[beli1910]

* Add a photo off nice and gentle

* Added French than English



* Add all of the following from the Var area Alblajinat

CccamInfo

EcmInfo

Minicat updeter

movie player

faund new cleaner

* Add Almagium Imo heart cam 135a of the image, away from the Var region

* Change the buttons on the remote control as the Humax

* Translation fucking works automatically to the channel, where the Arabic translation

Rudy Photo can be downloaded via

* Add a comprehensive satellite moons Hispasat30 degrees west of the moon Turcsat42 degrees east

* Var area is too large, you can download the image CNN CNN Emo Camera Server

flashwizard or dreamup

Picture in Gaaaaaah speed, stability, and beauty will leave you with some saccharine-shot to Taatmtau























I leave you with download and enjoy the picture greetings for you

The image has been raised in more than

[beli1910]

OpenPLi-Turko v11 DM500s_DMM HD_21062011_By meteor


Bu image da CCcam 2.2.1 ve Mgcamd 1.35a birlikte kullanilmistir.

** Kurulumdan once mutlaka yedeginizi aliniz.!!

** Yeni bootlogo kullanilmistir.

** Radyo ve scan logolari degistirilmistir.

** Bu image da kullanilan skinler:

** Gemini DDM HD_E1_Licher Mod
** Nabilo Army Omega
** Nabilo Army Punto

** LANGUAGES : Turkish , English , German , Italian

( Diger diller addons dan indirilebilir )

** CCcam 2.2.1 entegredir.

** Mgcamd 1.35a entegredir

** Mgcamd info entegredir.

** Ecminfo entegredir.

** Server bilgileri ozel menu

** Werbezapper entegredir.
( Werbezapper'i 1 ile 9 dk arasında ayar yaparak ,
izlediginiz kanala otomatik olarak geri donebilirsiniz...)

** Movieplayer entegredir.

** Teletex mevcuttur.

** Guncel cok uydulu satellite xml kullanilmistir.

** Kanallar help tusu ile yan yana yapilabilir.

** Doluluk orani % 25 dir...



** SADECE DREAM UP ile yukleyiniz..!!!



** Kurulumdan sonra Cccam.cfg yedeginizi var/etc icine atmaniz,
LNB ayarlarinizi yapmaniz ve kanal listenizi yuklemeniz yeterlidir.

Kurulumdan once mutlaka yedeginizi aliniz...

















Thanks meteor...


DOWNLOAD ( %20%20l)

[beli1910]

with the most beautiful knife Kingsize Persian6 and the integration of emo CCcam2.2.1 and integrate Blegn Drtic2.2 subsidized for the translation of films for all languages, including Arabic and numerical of Alpluzhnat task required and the addition of many is the top speed in open channels and the missile in Alcherinj







Additions:

1 - Copy off great and you can change them by plugins easylogo

2 - Add language to Arabic, with English

3 - Update Kernel Driver is a new picture to the top of the speed

4 - Ecminfo information has been incorporated into the knife and run automatically

5 - Merge Blegn Drtic2.2 support for subtitling in Arabic translation for the operation of sending a file to the path translation filename.dtc tmp

Then run Blegn Drtic2.2 and enjoy the film translated into Arabic

6 - CCcam 2.2.1 and merge CCcaminfo V1.1 in the first picture of crude away from the Var area


7 - change the original knife knife Skin Kingsize Persian6 enabled Picon

8 - to deactivate the property so as not to MHW Epg Athenj Dreambox

9 - click once on the ok button before you find a list of channels

10 - Add another file and comprehensive frequencies for each satellite

11 - Merge Blegn Minicat Key Updater in the raw image away from the Var area

12 - Merge Blegn Movieplayer in the raw image away from the Var area

13 - Merge Blegn Inadyn Configuration in the raw image away from the Var area

14 - Merge Blegn New Found Cleaner in the raw image away from the Var area

15 - add a property DVR for online registration

16 - Added a new file satellites.xml also updated with the correct names of the satellites


17 - modify the timing Timezone by region and by simply the most important countries to gain more space


18 - To change the look of the menus to become like the Humax through HELP button

19 - supports the automatic translation to channels that support this service

20 - The remaining area Var 84%



Note:





can pass this picture by Flashwisard or DreamUP





leave you with a screen-shot




Leave you with a screen-shot











+picon+%26+Drtic+2.2+%26+CCcam2.2.1+by+The+Fire.ra r/

[beli1910]

Openpli Maxvar Validator2 VIP Skin Update From 30/06/2011


Peace to you, and God's mercy and blessings

Exclusively to image the new Openpli change and surprise for lovers of knife VIP Validator2 Professor Mahdi was the amendment to the blade support with the addition of clock Analogique Picon. The rest of these additives, greetings from his brother Marwan





Explain Timeshift enabled image Openpli


Note: raw is not mixed with Imo only CCcam or Mgcamd

Extras:

On 30/06/2011:

Skin VIP Validator2 by Mehdi and updated by Marwen-
Fixed-Skin Preview
Enable Timeshift The DM500-
ADD permanent timeshift recording (Mount-Point)
Fixed-egauge
Fixed configuration Inadyn
- You can select any audio language preferences
- Boot the new image
- Add French language besides Arabic and English
- Integration CCcaminfo away from the Var region
- Integration Ecminfo away from the Var region
- Film Integration away from the Var region
- Integration Minicatkey updater from the Var area

Note: of raw (img) can be transferred to the Dream through dreamup flashwizard or leave you with images and files


leave you with images and files to download:




>

Marwen

[Lujdzo]

Peace and God's mercy

I am pleased to present a photo Ahdtadelat Dreambox 500S
this amendment I want my father to get satisfaction
of the three major bear one of the strongest images Dreambox, ViP Validator 2 as a noun because it is an extract from the former to present him with a knife ...
do not extend your
and give them the most important changes is





6 - Bilgin inadyn configuration (from var area)

7 - Bilgin drtic to Sthaddamh Alavlammn Guenoah in the translation of foreign (from the surface var) 8 - Bilgin Minicat key updater to download the latest keys from a gentle, no hassle (away from the var)


9 - CCcam turned on immediately after the terraces on the device is enough to add cccam.cfg to the server in the path var / ect and operate Channel
10 - integration of key packaging and Austria, TNT Sat + ORF 11 - the frequency and speed of the search 12 - change the image in a magnificent 13 - to cancel the property MHW EPG is not Althnic 14 - Stop the search, automatic 15 - to change the original knife ViP 2 Validator Splendor 16 - Change channels by pressing aid, such as Humax 17 - register by clicking the aid and radio 18 - to delete files that others may Mnconha Zeroria cause the image and update the entire image to become the fastest and coolest


19 - var-free space 84%


Here are some pictures
Attached Thumbnails














PLi®_Jade3__ViP_Validator2_Cccam2.2.1.rar (4.87 MB)
()

[beli1910]

OpenPLi-Turko DM500s v12 Vu+Duo BluesOfDreams


Dm 500s de ilk defa vu+duo skin



** Yeni bootlogo kullanilmistir.

** Radyo ve scan logolari degistirilmistir.

** Bu image da kullanilan skinler:

** Vu+Duo BluesOfDreams_1.4
** mediapli_8
** darkpli_8

** LANGUAGES : Turkish , English , German
( Diger diller addons dan indirilebilir )

** CCcam 2.2.1 entegredir.

** Mgcamd 1.35a entegredir

** Mgcamd info entegredir.

** Ecminfo entegredir.

** Server bilgileri ozel menu entegredir.

** Werbezapper entegredir.
( Werbezapper'i 1 ile 9 dk arasında ayar yaparak ,
izlediginiz kanala otomatik olarak geri donebilirsiniz...)

** Movieplayer entegredir.

** Teletex mevcuttur.

** Guncel cok uydulu satellite xml kullanilmistir.

** Kanallar help tusu ile yan yana yapilabilir.

** Doluluk orani % 25 dir...

Dream up veya DreamBox-OptiFlasher-v1.0.2
ile yukleyebilirsiniz...



















Thanks meteor

r.rar.html

[beli1910]

DM 500 OpenPli Skins Vu+ Blu By MERDAS.





OpenPli This expansion is being prepared by Brother Marwan greetings to him and all offer my motherfuckin changes * Add photos off the Splendor * Add Arabic, French, English Bejjani * Changing the original knife blade was transformed with Vu + HD will be available to all on the Dreambox 500S, very good * Add all the following information Alblajinat EcmInfo CCcam configuration Inadyn Minicat Key Updater film * is empty or you can download the IMO IMO is just for you from the image server, and all easily *



Enable Timeshift The DM500
ADD permanent timeshift recording (Mount-Point)

* This is raw (img) can be transferred to the Dream through dreamup or flashwizard
All these changes were without prejudice to the Var area

leave you with some saccharine-shot image


















last leave you with Image Download and enjoy aesthetic wishes of success and satisfaction of this work,

Kod:

[Net Babu]

mkufyCmhGE8

[Lujdzo]

Open PLI Of 25/8/11

OSCAM 1.10rc-svn build #5921 & CCcam 2.13 Preinstalled with 0963 Configs
Radio Times EPG Is Ready Mapped !


Ready to Run, Just Insert Your Card !

No need to enter boxkey as oscam will detect your card automatically.

Card speed automatically clocked to 5mhz

Image Contains UK bouquets & will store 2 days worth of epg data, the following bouquets are already mapped for you.

Sports



Movies



Documentary's



Entertainment



Lifestyle

Kids

Music

To download epg simply press yellow select dreambox epg config then press yellow to retrieve.





NOTE: 30 seconds after boot both cams are restarted with oscam starting first, this is to eliminate any problems with oscam not finding card reader.

Installation

Install Via Flashwizard pro (attached )
1. Download Image & exract to desktop.
2. Download & start Flashwizard pro
3. Fill in DM configuration Then simply drag image file Into programme as shown below
4. Enjoy, image will be flashed in under 2 minuetes



Enjoy

image




flashwizard

[tytus 56]

Exclusive image adjustment OpenPli knife BlackHorseLite on 4/9/2011





Dear brothers, Knowing Peace


Today offer you modify the very beauty and lightness of the image OpenPli motherfuckin After the additions you made ​​to the picture becomes very good Taalo review amendments

*- Add Pot Logo wonderful Hd

*- Add Arabic and French language next to English




*- Change the original knife with a knife turned him from a picture to Nmiss image Play produce a serious brother Zeno name knife BlackHorseLite

*- The amendment to the lines and the knife in some of the things to be the best Mmy it was

*- Albayekonat knife supports those who wish to add

*- Add Blajan Cccam Info away from the Var area

*- Add Blajan EcmInfo away from the Var area

*- Add Blajan Inadyn Configuration away from the Var area

*- Add Blajan Minicat Key Updater away from the Var area

*- Add Blajan MoviePlayer away from the Var area

*- display might change channels by pressing the Help button and then ok



*- Add Ahdt file includes satellites from the satellites Hisbasat30 hgn TurcSat42




*- Note is passed through the program or program DreamUp FlashWizard




leave you with the saccharin-shot image of the















brothers leave you to download the image and enjoy my greetings to all

[Lujdzo]

OpenPLi-Turko v14 DM500s CCcam221 Vu+ Wine Metallic Alu HD

** Yeni bootlogo kullanilmistir.

** Radyo ve scan logolari degistirilmistir.

** Image da kullanilan skinler:

** Vu+ Wine Metallic Alu HD
** darkpli_8
** mediapli_8



** LANGUAGES : Turkish , English , German ,
Russian , Italian , French
( Diger diller addons dan indirilebilir )

** CCcam 2.2.1 entegredir.

** Ecminfo entegredir.

** Server bilgileri ozel menu entegredir.

** Werbezapper entegredir.
( Werbezapper'i 1 ile 9 dk arasında ayar yaparak ,
izlediginiz kanala otomatik olarak geri donebilirsiniz...)

** Movieplayer entegredir.

** Teletex mevcuttur.

** Guncel cok uydulu satellite xml kullanilmistir.

** Kanallar help tusu ile yan yana yapilabilir.

** Doluluk orani % 25 dir...


Dream up veya DreamBox-OptiFlasher-v1.0.2
ile yukleyebilirsiniz...

Not: En garanti yukleme her zaman
DREAM UP ile yapilir...



** Kurulumdan sonra Cccam.cfg yedeginizi var/etc icine atmaniz,
LNB ayarlarinizi yapmaniz ve kanal listenizi yuklemeniz yeterlidir.

Kurulumdan once mutlaka yedeginizi aliniz...




%20%20eteor.rar.html

[beli1910]

PLi-Jade3_Skin Vip Validator2 Gbox 2.1b By nasro30





Modified image PLi-Jade3 for Dreambox dm 500 s on 06/01/2012
Knife vip validator 2 wonderful surprise, and the integration of emo Gbox 2.1b After the amendment was to fit with the image

The beautiful thing is emo Jepoks supports up to 2048 cards

Where it is in this missile in Alchering emo for the first time if you find the picture in another forum they are transferred from here

In addition, French and Arabic language along with English, in addition Alpluzinat

Gbox info, etc. ...

In the heart of the image, and many additions

File an interview on 06/01/12 moons of moons task only ...

Used area of ​​the mouse 17%

Here are some of the saccharin-shot:


Bots Lugo amended by the brother who did not sleep properly because of the Teapot

( Pryame )

Rani is often Ntaa desert, tea, venison
















Nasro30

[beli1910]

OpenPLi-Turko DM500S dark-shadow_HD_By meteor V17

** Image used in skins:

** darkpli_8
** mediapli_8
** dark-shadow_hd

Special Thanks: Maggy and zbigzbig20


** LANGUAGES: Turkish , Türkçe , Deutch
Italian . (Other languages ​​can be downloaded from addons)

** New bootlogo used.

** Radio and scan logos changed.

** CCcam 2.2.1 integrated.

** CCcam 2.3.0 integrated. (separate image)

** 1:38 Mgcamd integrated.

** Ecminfo integrated.

** Server information, special menu is integrated.

** Inadyn







satellite satellite.xml used.

** Channels help button with side by side can be made.

** Occupancy rate of 25% is ...


Dream up , or DreamBox-OptiFlasher-v1.0.2
and install the ...

Note: every time upload the warranty
DREAM UP done with ...


the more the merrier

* Please, installed the Flashwizard's half with
a message such as yazmayin.Yukarida which
says to install programs!

* Although just how easy it OptiFlasher with the loading device,
at the end of upload from time to time açilmayabiliyor.
Please, consider it and installation choice
Adjust accordingly ...!!

--- Image The test given in the forum.
--- Still, the responsibility belongs yukleyene.


** After installation CCcam.cfg your reserve have a / etc to take to,
LNB adjust your settings and channel list is enough to install.

[beli1910]

OpenPLi-Turko v18a DM500s Blue Silver Brushed_HD_By meteor


** Image da kullanilan skinler:

** darkpli_8
** Blue Silver Brushed HD
** Blue Silver Brushed HD_2
** Blue Silver Brushed HD_lite

Special Thanks : Maggy



** LANGUAGES : Turkish , English , Deutch .
( Diger diller addons dan indirilebilir )

** Yeni bootlogo kullanilmistir.

** Radyo ve scan logolari degistirilmistir.

** CCcam 2.3.0 entegredir.

** Mgcamd 1.38 entegredir.

** Ecminfo entegredir.

** Server bilgileri ozel menu entegredir.

** Inadyn configuration entegredir.

** Movieplayer entegredir.

** Werbezapper entegredir.

** Teletex mevcuttur.

** Guncel cok uydulu satellite.xml kullanilmistir.

** Kanallar help tusu ile yan yana yapilabilir.

** Doluluk orani % 26 dir...


Dream up veya DreamBox-OptiFlasher-v1.0.2
ile yukleyebilirsiniz...

Not: En garanti yukleme her zaman
DREAM UP ile yapilir...



















Diger resimler icin Tikla ( com%2Falbums%2Fz410%2Fmaxmeteorx%2FOpenpli%2520Tur ko%2520v18a%2F%3Falbumview%3Dslideshow)

[beli1910]

OpenPli _btkCam_Mgcam1.3.8_CCcam2.3.0 Skin dark-shadow_HD
UPDATE 01/02/2012

MgCamd 1.3.8

Emu CCcam 2.3.0...

Skin dark-shadow_HD..Maggy

plugins...




















download